EcoQube Pro Case Study: Multifamily Radon Testing

When it comes to multifamily radon testing, success depends on more than accurate measurements. Inspectors and mitigators must coordinate access to occupied units, follow standardized testing procedures, and deliver timely results that help property managers make informed decisions.

This case study follows a real-world multifamily radon testing project performed by True Air Technologies at an apartment complex in Clemson, South Carolina, where 87 apartment units were tested using EcoQube Pro. From the initial site assessment to deployment, retrieval, and reporting, the project demonstrates how careful planning and continuous radon monitoring can simplify large-scale testing while improving efficiency.

Whether you're an experienced radon mitigator or expanding into multifamily projects, the lessons from this project offer practical insights you can apply to your own workflow.

Watch the Project in Action

Watch the complete project walkthrough from the initial site assessment to monitor deployment, retrieval, and immediate mitigation planning. 

Project at a Glance

The Challenge: Testing Multiple Occupied Apartments

Testing a single home is relatively straightforward. A multifamily property introduces an entirely different level of complexity.

Every apartment requires uniform monitoring placement, accurate documentation, coordination with maintenance staff, and careful scheduling around residents. Existing mitigation systems must also be inspected before testing begins to ensure measurements are taken under the proper conditions.

Without a repeatable workflow, large projects can quickly become time-consuming and difficult to manage.

Starting with a Thorough Site Assessment

Before deploying any monitors, the team completed a detailed walkthrough of the property.

Rather than immediately placing devices, they first inspected the existing radon mitigation systems, labeled mitigation fans, verified that each fan was operating correctly, and documented the property's conditions. Coordinating with onsite maintenance staff before entering apartments also helped keep the deployment organized.

This preparation established a consistent starting point for the project while reducing the likelihood of unexpected issues later in the testing process.

Why EcoQube Pro Was the Right Fit for This Project 

For a project involving dozens of occupied apartments, minimizing unnecessary steps was essential.

Instead of relying on passive charcoal test kits that require laboratory analysis, the team selected EcoQube Pro, a continuous radon monitor designed for professional applications.

One advantage immediately stood out:

"It's not a charcoal device, so it eliminates the need for blanks and spikes. It makes deployment easier."

- Merritt Gantt, True Air Technologies

Because measurement data is collected continuously, professionals can review completed results immediately after retrieval rather than waiting for laboratory processing. That streamlined workflow helped simplify testing across all 87 apartments.

A  Controlled Deployment  Procedure

Consistency is critical during large multifamily projects.

To ensure every apartment was tested the same way, the team followed a standardized deployment process.

Each EcoQube Pro monitor was:

• Mounted securely using removable Command Strips

• Connected to a power outlet

• Assigned to the appropriate apartment through the mobile app

• Configured for a 96-hour measurement period

• Verified before leaving the unit

Testing notices were also posted to inform residents that professional radon measurements were in progress.

Following the same workflow in every apartment reduced setup errors and simplified project management.

Retrieval Was Simple and Efficient

Once the testing period ended, retrieving the monitors was just as organized.

Using Bluetooth, the team connected to each EcoQube Pro from the hallway to review completed measurements, upload data, and reset the monitor before entering the apartment to collect the device. The download and retrieval process took less than a minute per apartment and caused minimal disturbance to tenants 

Because the results were immediately available, there was no need to wait for laboratory reports before reviewing which units required additional attention.

A practical tip from the project also emerged: removing the Command Strip by gently pulling the entire device straight downward prevented any paint damage while making retrieval faster.

Results That Improved the Workflow

Large-scale testing projects are often judged by how efficiently they move from measurement to action.

This project delivered strong results:

• 87 apartment units successfully tested

• Only one monitor became unplugged during the project

• Approximately seven hours for deployment and retrieval

• Immediate access to completed measurement data

Most of the team's time was spent accessing occupied apartments rather than configuring the monitors themselves.

Mirritt Gantt emphasized the ability to review results immediately after devices' retrieval meant there was no delay between testing and evaluating which apartments required mitigation.

      "The best part about it is that we have mitigation decisions immediately. We don't have to have a second round of testing."

What This Case Study Means for Radon Professionals

Every multifamily property presents different challenges, but this project highlights several practices that can improve efficiency on large-scale radon measurement jobs.

A detailed site assessment provides valuable information before testing begins.

Using a standardized deployment procedure enhances quality control across every apartment.

Continuous radon monitoring reduces mailing and lab delays by providing immediate access to completed measurement data. The EcoQube Pro dashboard also generates customized, ANSI-AARST- and HUD-compliant project summary reports with minimal effort. 

Finally, by combining deployment, retrieval, and reporting into one workflow, professionals can spend less time on manual tasks and more time delivering value to clients.

Ready to Simplify Your Next Multifamily Radon Testing Project?

EcoQube Pro is designed for professional radon testers s and mitigators who need accurate continuous radon monitoring, streamlined deployment, Bluetooth connectivity, and faster reporting for residential and large-scale commercial projects.

Final Thoughts

Large multifamily radon testing projects require more than reliable equipment—they require an organized process that keeps deployment, retrieval, reporting, and mitigation planning moving efficiently.

This case study demonstrates how thoughtful preparation, standardized workflows, and continuous radon monitoring helped simplify testing across 87 apartment units while providing immediate access to actionable results.

For radon inspectors and mitigators looking to improve efficiency on apartment, commercial, or institutional projects, adopting a repeatable workflow supported by continuous monitoring can help reduce delays, improve reporting, and provide clients with faster recommendations.

Frequently Asked Questions

How do you reduce the risk of monitors being unplugged during apartment testing?

Clear communication with residents, visible testing notices, and careful monitor placement all help reduce interruptions during occupied-unit testing.

Why is a site assessment important before multifamily radon testing?

A site assessment verifies mitigation system operation, identifies potential issues before testing begins, and ensures consistent measurement conditions throughout the property.

What types of buildings benefit from continuous radon monitoring?

Continuous radon monitoring is well-suited for apartment complexes, educational campuses, assisted living facilities, commercial buildings, community centers, and other large properties requiring efficient testing.

Can continuous radon monitoring improve project turnaround?

Yes. Immediate access to completed measurement data allows inspectors and mitigators to prepare reports and discuss mitigation recommendations without waiting for laboratory analysis.