Outil de diagnostic efficace pour la détection des points chauds de radon. Gagnez du temps avec une capture rapide de 5 minutes de plusieurs emplacements, toutes les lectures dans une seule application
The EcoTracker solution bundles 4 high performance radon detectors which allow radon professionals to simultaneously assess multiple locations within homes, educational facilities, care centers, or commercial buildings. Measuring radon levels at the exact same time
allows easy identification of radon hotspots in homes, schools, daycare
centers or commercial buildings. Each of the detectors uses Bluetooth Low
Energy (BLE) to broadcast its data to an app installed on the phone or tablet.
EcoTrackers integrate Ecosense’s patented ion chamber radon sensor, which
offers industry leading 30 CPH/pCi/L (counts per hour per pCi per liter)
sensitivity.
FAST SNIFF MODE - 5 MINUTES
The first reading appears within as little as 5 minutes after set-up. Radon data will be updated and logged every 5 minutes.
Simultaneously check for radon level over four separate locations
The EcoTracker solution bundles 4 radon detectors into a compact system which allows mitigators to rapidly and easily measure radon levels over multiple locations within a building at the same time.
Single mobile app for monitoring all four detectors
Each of the detectors use Bluetooth Low Energy (BLE) to broadcast their data simultaneously to an app installed on a smartphone or tablet. All 4 radon measurements are displayed for easy comparison.
Support for continuous radon monitoring mode
One or more of the EcoTracker’s 4 detector units can also be set for hourly or continuous results if leaving the units in place for hours or days is so desired.
Radon Sensor
Pulsed ionization chamber
Data Storage Interval
Stores every 5 min or 10 min in sniff mode Stores every 60 min (moving average) in CRM mode
What’s new in this version? 5 mins sniff mode Previously, the EcoTracker monitor reported spot readings every 5 minutes. When using the latest firmware update, the EcoTracker monitor will start averaging every 5 minute reading up until 6 data points have been collected, then will start showing a 30 minute moving average.
10 mins sniff mode Previously, the EcoTracker monitor reported spot readings every 10 minutes. When using the latest firmware update, the EcoTracker monitor will start averaging every 10 minute reading up until 3 data points have been collected, then will start showing a 30 minute moving average.
What is the service life of the EcoTracker?
EcoTracker is expected to have a service life of 5 years but this depends on usage conditions, wear tear, etc.
What does the EcoTracker package come with?
EcoTracker package includes the four EcoTracker units along with carrying bag, four power adaptors, four DC extension cables, four step-up cables and product quality certificate.
What is the return and refund policy?
We offer returns and refunds within 30 days of the original purchase date. You will be responsible for paying the postage/shipping fees for returning your device. If the device is determined to be defective, you will receive a full refund, and the return shipping fees will be refunded to you by Ecosense.
What is the data storage capacity of each of the 5-minute, 10-minute sniff mode, and continuous monitoring mode?
No. If you would like to use a battery, the EcoTracker requires a 12-volt input. Any standard 5-volt battery pack can also be used, with a 5-volt to 12-volt adapter cable. The required power adapter plug size is 5.5mm x 2.1mm. 20 Ah battery has a 72-hour life while a 30 Ah battery will increase the battery life to approximately 105 hours.
