Empower your inspection with RadonEye Pro
Tested and certified by AARST-NRPP and NRSB for the North America market.
Perform your 48 hour testing with ease and confidence.
On board ultra-sensitive 30 CPH patented radon detection technology instrumentation for >8X accuracy.
WI-FI & BLUETOOTH
Wi-Fi and bluetooth enabled for maximum connectivity and remote monitoring capabilities.
CENTRALIZED CONTROL & INSIGHT
The RadonEye Pro web dashboard makes it easy to monitor, manage devices and generate reports for your clients.
FULL FEATURE SMARTPHONE APP
Manage inspection (start/finish), generate report and share with clients all from the app.
Pulsed ionization chamber
30 CPH (Count Per Hour) per 1 pCi/L
Radon Accuracy/ Precision
< ±10% at 10 pCi/L after 10 hours
Radon Measurement Rate
Every 10 minutes
Radon Measurement Result
60 minutes moving average
Radon Measurement Range
0.2 ~ 255 pCi/L (7~9,435 Bq/m³)
Integrated audio alarm (configurable to set radon level)
Radon Level Visual Indicator
12V, 0.1A, Extend DC adapter
0.529 lbs (240g)
Operating Temp Range
Centralized control and insight
The RadonEye Pro web dashboard makes it easy to monitor, manage devices and generate reports for your clients.RadonEye Pro Web DashboardRadon Report Sample
Schedule your inspection, customizable inspection settings
Remote monitoring is enabled when RadonEye Pro is connected to a Wi-Fi network.
Customizable radon report you can share with your clients.
Now Available: Reporting Compliance Update
Broad Range of Mobile Devices
App works with all iOS and Android based mobile devices.
Download free RadonEye Pro app
RadonEye Pro Web Dashboard
Customize and generate your reports, monitor status of your devices, manage your devices and clients
Frequently Asked Questions
Does the RadonEye Pro require calibration?
Yes, the RadonEye Pro should have a calibration performed annually. Current Ecosense annual calibration partners are:
- For US :
Contact # (937) 236-8805
KSU (Kansas State University)
Contact # (785) 532-6026
* Exclusively for the Ecosense RadonEye Pro:
- State-mandated initial calibration certification ($130)
- Annual renewal calibration ($150)
Register/Sign In and Order my Radon Eye Pro Calibration
- For Canada :
RSIC (Radiation Safety Institute of Canada)
Contact # (416) 650-9090
Does the RadonEye Pro come with a battery back-up?
No. If you would like to use a battery, the RadonEye Pro requires a 12-volt input. Any standard 5-volt battery pack can also be used, with a 5-volt to 12-volt adapter cable. The required power adapter plug size is 5.5mm x 2.1mm.
A 20 Ah battery has a 72-hour life while a 30 Ah battery will increase the battery life to approximately 105 hours.
What does the RadonEye Pro package come with?
RadonEye Pro package includes the RadonEye Pro unit, a tripod holder, step-up cable, adapter extension cable, battery pouch, carrying bag for inspection and calibration certificate. The tripod and portable battery are not included.
Can the RadonEye Pro be attached to a tripod?
Yes, the RadonEye Pro unit comes with a tripod adapter. Note, an actual tripod is not included in the RadonEye Pro package.
What is the latest version of the RadonEye Pro smartphone app software?
For iOS: iOS 2.0.5
For Android : Android 2.0.5
Does the RadonEye Pro have any tamper monitoring?
Yes, RadonEye Pro has built-in support for an accelerometer. This will show a time stamp of when the device was tampered in the raw data and app.
Does the RadonEye Pro have a reset function?
No, there is no function to reset RadonEye Pro. It supports following storage scenarios:
a. Inspection mode: Max 240hours x 10 (2,400 data points)
b. Continuous mode: 300days (7,200 data points)
Once the data storage capacity is exceeded, the oldest data is deleted and overwritten.
How do I access the web dashboard for RadonEye Pro?
RadonEye Pro web dashboard can be accessed by logging in from following home page : http://radoneyepro.com
How do I use the RadonEye Pro without a cellular network or Wi-Fi network?
- The app must be installed before moving to a site where no network is available.
- User needs to login the app before moving to a site.
- User keep logging into the app (Do not log out or close the app).
- Device is registered into tester’s account before moving to a site.
- Connect device and start inspection using Bluetooth.
- Connect device and finish the inspection using Bluetooth.
What is the return and refund policy?
We offer returns and refunds within 30 days of the original purchase date. You will be responsible for paying the postage/shipping fees for returning your device. If the device is determined to be defective, you will receive a full refund, and the return shipping fees will be refunded to you by Ecosense.